Please Note - BT Synergy 2150 User Manual

Please note

It is important to set the Day and
Time in preparation for using your
answering machine.
Please note
If your Synergy 2150 is disconnected
from the power, for example during
a power cut, when power is restored
the display will show Searching...
followed by the idle screen and the
green power light on the base
will flash.
You will not have lost your messages
but you will need to set the day and
time again.
Once this is completed the green
power light on the base will no
longer flash.
To set the day and time
Press to open the main menu.
Options
Press the
Del
arrows until the display
flashes TAM Settings.
Press the
Options
to confirm.
Press the
Del
arrows until the display
flashes Day/Time.
Press the
Options
to confirm.
Display will show
Day: 1234567
Time: 00:00
Use to scroll through 1 Mon,
Del
2 Tues, 3 Wed, 4 Thurs,
5 Fri, 6 Sat, 7 Sun or press
the number on the keypad.
Press the
Options
to confirm.
Enter the time using the
24 hour clock. So for 14:52
type 1452
Press the
Options
to confirm.
You will then hear the
confirmation beeps.
UP and DOWN
button
OPTIONS
UP and DOWN
OPTIONS button
button
OPTIONS
on the keypad.
OPTIONS button
22