Table of Contents
Advertisement
Quick Links
1
The Bixpy Universal Adapter has been designed to fit virtually every kayak or canoe. However,
depending on your vessel's design, you may have to get more creative and will definitely require
some tools and some DIY skills. Also keep in mind that you will most likely need to drill some
holes into the body of your vessel. Doing some planning will ensure that you don't make any
mistakes and minimize damage to your vessel.
If you're installing the Bixpy Jet on a "sit-on" kayak, you may need to install some hatches on
your kayak to gain access to the inside of your kayak for easier installation. These come in a
variety of sizes and shapes and readily available at most marine shops or on-line.
2
Do some planning. The picture below illustrates the
Do some planning. The picture below illustrates the
complete universal attachment. You will need to find
complete universal attachment. You will need to find
a good place to attach the RAM Mount (1) and the Bixpy
a good place to attach the RAM Mount (1) and the Bixpy
Support Clamp (2). The further apart they are, the more
Support Clamp (2). The further apart they are, the more
stable your motor and setup. Keep in mind, you can
stable your motor and setup. Keep in mind, you can
mount the motor off the side of your vessel if symmetrical
mount the motor off the side of your vessel if symmetrical
installation is not possible.
installation is not possible.
1
VIDEO:
www.bixpy.com/universal-assembly
Bixpy Universal Adapter
2
Advertisement
Table of Contents
Related Manuals for Bixpy Universal Adapter
Summary of Contents for Bixpy Universal Adapter
- Page 1 If you’re installing the Bixpy Jet on a “sit-on” kayak, you may need to install some hatches on your kayak to gain access to the inside of your kayak for easier installation. These come in a variety of sizes and shapes and readily available at most marine shops or on-line.
- Page 2 Use some silicone around the screws and below the mount to ensure water tightness. Mount your Bixpy Pipe Support Clamp as per your plans from step 2 1. Use the provided nuts and bolts to secure clamp to your kayak.
- Page 3 1. Use the two knurled bolts to assemble the vertical and horizontal assemblies together 2. If you choose not to use the Bixpy Steering System, you can lock down your vertical pipe to prevent it from turning. Use the provided threaded screws to lock down your vertical pipe.
- Page 4 You MUST read your motor and battery user manual prior to using Bixpy products and agree to all the conditions. Respect others and wildlife at all times - on and off water.
Need help?
Do you have a question about the Universal Adapter and is the answer not in the manual?
Questions and answers