Advertisement
1
Replace your rudder cover with the
Bixpy Rudder cover with ball mount
2
Attach your horizontal pipe using the mount clamp
DO NOT OVERTIGHTEN the four screws!
3
Use the provided pipe clamp to secure the horizontal pipe to the H-Rail on the back of your
®
Hobie
Pro Angler. Adjust and move as necessary to get the best fit possible.
VIDEO:
Bixpy Hobie
www.bixpy.com/po-assembly
Pro Angler
®
Adapter
™
Advertisement
Table of Contents
Related Manuals for Bixpy Hobie Pro Angler
Summary of Contents for Bixpy Hobie Pro Angler
- Page 1 ® ™ Replace your rudder cover with the Bixpy Rudder cover with ball mount Attach your horizontal pipe using the mount clamp DO NOT OVERTIGHTEN the four screws! Use the provided pipe clamp to secure the horizontal pipe to the H-Rail on the back of your ®...
- Page 2 3. Take special care to make sure you do not damage your power cord when drilling your pipe. DO NOT DRILL THROUGH!!! Attach your Bixpy adapter to your Bixpy Jet 1. Align connector pins 2. Pull nose latch forward to allow metal toe to sit flush 3.
- Page 3 You MUST read your motor and battery user manual prior to using Bixpy products and agree to all the conditions. Respect others and wildlife at all times - on and off water.
Need help?
Do you have a question about the Hobie Pro Angler and is the answer not in the manual?
Questions and answers