Active Arming - Viper 790XV Owner's Manual

Illumination On/Off
Within five seconds of entering Programming Mode, press
The remote will beep once for on, twice for off and the light will
turn on/off with each press.
Page Mode On/Off
After entering Programming Mode, press
seconds to toggle on and off. When the Page Mode is on, the
remote control will wake up periodically to check for messages
from the security module. It will also wake up when any button
is pushed. When Page Mode is off, the remote control "sleeps"
until a button is pushed, extending the life of the battery.
To Exit Programming Mode
To exit Programming Mode, take no action for five seconds. The
remote control will generate two beeps to indicate programming
mode has been exited.
u u s s i i n n g g y y o o u u r r s s y y s s t t e e m m
➜

active arming

Press for one second to arm the system. The vehicle's lights
will flash once, the doors will lock, the siren will chirp once, and
while the system is armed, the status LED will blink approxi-
mately once per second to indicate the system is actively
protecting the vehicle.
16
.
within five
© 2002 directed electronics, inc.