To Enter Shock Sensor Adjustment Mode - Viper 5000 Owner's Manual

s s h h o o c c k k s s e e n n s s o o r r a a d d j j u u s s t t m m e e n n t t
➜

To enter shock sensor adjustment mode:

n n o o t t e e : : The system must be disarmed, and doors and other
protected entries (zones 1 and 6) must be closed, and
ignition (zone 5) must be off.
1. Press and hold
2. The siren will emit one long chirp and LCD remote will
emit 1 long beep when the buttons on the remote are
released (or 1 vibrate, or 1 long beep with vibrate) to indi-
cate entry into shock adjustment mode.
3. The word "SENSOR" on the LCD transmitter above the
adjustment indicator bar
duration of shock adjustment mode. The sensor bar indi-
cator will display the current sensor sensitivity setting.
Increased sensitivity is indicated as the bar fills to the right.
n n o o t t e e : : The LCD transmitter will also have the zone 2 icon
and the alarm icon indicating.
4. The in vehicle LED will illuminate continuously for the
duration of shock adjustment mode.
n n o o t t e e : : When the shock sensor adjustment mode is entered,
all other timers and operations are bypassed until shock-
sensor adjustment mode is exited.
© 2005 directed electronics, inc.
and buttons for 6-seconds.
will flash for the
35