Page 1
Banff 3 Instruction Guide Important Safety Information Always read this manual first before attempting to install or use this fireplace. For your safety, always comply with all warnings and safety Instructions contained in this manual to prevent personal injury or property damage.
Warranty Information welcome to evonicfires evonicfires is an award-winning brand of CK Fires Ltd, situated just outside Stratford- upon-Avon, we manufacture a range of British built electric fires and are considered as one of the most technically advanced manufacturers in the world, with optional...
ELECTRICAL SAFETY: When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: ① Read all instructions before using this electric fireplace. ② This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Page 4
⑬ Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage to the heater. ⑭ To prevent a possible fire, do not block air intakes or exhaust in any manner.
IMPORTANT INSTRUCTIONS: Please read these instructions before installation or use and keep this booklet handy for future reference. All Evonic fires products meet the requirements of the EC Directives. These directives have been met by compliance with the following standards: EU 2011-65/EU 2015/863 - Restriction of Hazardous Substances EN 55014-1:2006 + A2:2011 Electromagnetic compatibility.
Page 6
Never use aerosols or steam cleaners near this product. Never route the electric cable near the heater outlet. Never route the electric cable under carpets or floor coverings. Never install this product close to curtains or combustible materials. Never Use the heater to dry clothes or other objects. Never remove the fireplace surrounding without isolating the electric supply.
Manual Operation: Right hand side view of stove Left hand side view of stove FIG 1 FIG 2 FIG 1 shows the location of the FIG 2 shows the location of the IEC power inlet. manual switches.
Technical Specification: MODEL HEIGHT WIDTH DEPTH BANFF3 670MM 460MM 355MM INSTALLATION REQUIREMENTS: BANFF/BANFF3: This product has been designed to be freestanding against a flat wall or chimney breast. (Heater unit cut-out) (This is a safety feature, to safe guard against further damage to the product).
Door removal & fuel placement: The door is fixed into position using keyhole slots. To Then pull the door away from the stove body remove, simply lift the door (FIG 1). (FIG 2). Place fuel set (logs) as per the suggested layout. Suggested fuel layout.
This warranty is in addition to and does not affect the purchasers statutory rights of consumers. Registering product: o register a product please visit: www.evonicfires.co.uk and complete the fields required under the Register a Product Section. By registering your appliance, an extra...
Need help?
Do you have a question about the Banff 3 and is the answer not in the manual?
Questions and answers