Synology Ds720+ At A Glance - Synology DS720+ Hardware Installation Manual

Synology DS720+ at a Glance

1
2
No. Article Name
1 Drive Tray
2
Drive Tray Lock
3
Status Indicator
Drive Status
4
Indicator
5
USB 3.0 Port
6 Power Button
7 Fan
8 LAN Port
9 RESET Button
10 eSATA Port
11 Power Port
Kensington
12
Security Slot
13 USB 3.0 Port
1
For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.
4 Chapter 1: Before You Start
3
4
7
8
9
5
10
6
11
Location
Install drives (hard disk drives or solid state drives) here.
Lock or unlock drive trays.
Displays the status of the system. For more information, see "LED Indicator
Table".
Displays the status of each drive. For more information, see "LED Indicator
Front
Table".
Connect external drives or other USB devices to the Synology NAS here.
1. Press to power on your Synology NAS.
2. To power off your Synology NAS, press and hold until you hear a beep
sound and the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
Synology NAS will emit a beeping sound.
Connect a network cable here.
1. Press and hold until you hear a beep sound to restore the IP address,
DNS server, and password for the admin account to default.
2. Press and hold until you hear a beep, then press and hold again until you
hear three beeps to return the Synology NAS to "Not Installed" status so
that DiskStation Manager (DSM) can be reinstalled.
Rear
Connect external SATA drives or Synology Expansion Unit
here.
Synology NAS
Connect power cord here.
Attach a Kensington security lock here.
Connect external drives or other USB devices to the Synology NAS here.
12
13
Description
1
to the