Table of Contents
Advertisement
10.4 Wear parts
10.4.1 ReplaceAeration blade
Before carrying out maintenance work or changing the machine's settings, it must have
come to a complete standstill. The tractor's engine must be switched off and the key must
have been removed from the ignition.
For reasons of quality and safety, only use original Imants® parts.
Dispose of any worn components in an environmentally responsible manner. Always
follow the locally applicable statutory regulations.
Procedure
1.
Remove bolt connection
2.
RemoveAeration blade
3.
Clean wear and tear part holder
4.
InstallAeration blade
5.
Do up bolt connection
6.
Bolt connection torque:
M14: 135 [Nm] / 100 (lbf ft)
M12: 86 [Nm] / 64 (lbf ft)
Table 9: Aeration blade
Illustration
Maintenance of the machine
39
Advertisement
Table of Contents
