Table of Contents
Advertisement
7.1 Putting the PTO shaft into operation
The PTO shaft is an essential part of the machine.
There are a number of matters that need to be watched out for:
•
See PTO drive shaft manual
•
of
http://www.gkn-walterscheid.de/downloads/anleitungen
Points of attention
1.
The length of the PTO shaft.
•
With the shortest operating distance between the tractor and the machine, the PTO shaft
must still be able to slide in by 40 mm / 1.6 inch . In this, account must be taken of:
•
•
The minimum profile overlap is: See PTO shaft manual
2.
Attach overloading/freewheel clutch or bolt connection (conical) at the machine end
A hydraulic top link (if present) in its shortest position
Putting the machine into operation
22
Advertisement
Table of Contents
