Advertisement
FITTING AND REMOVING FIXED GUIDE COMBS
To Fit
•
Hook the front of the guide comb over the teeth of the wide trimmer.
•
Press the back of the guide comb down until it clicks into place.
To Remove
•
Lift the tab on the back of the guide comb upwards until it comes free from the wide
trimmer head.
FITTING AND REMOVING THE ADJUSTABLE COMB
•
To fit, line up the rails on the comb with the slots on the sides of the groomer and
slide the comb downwards onto the groomer.
•
To adjust, press and hold the adjustment button on the back of the comb and slide
the comb up or down. Release the button to lock the comb at that position. The
length of cut is indicated by the scale on the side of the trimmer.
•
To remove, press and hold the adjustment button and push the comb up and off the
groomer.
INSTRUCTIONS FOR USE
•
Comb facial hair with a fine comb before you start trimming.
•
Comb your hair in the direction that it grows so that the hairs are at their maximum
height and facing in the same direction.
•
After trimming, lightly go over the trimmed areas with the foil to get a smooth clean
finish.
•
Since all hairs do not grow in the same direction, you may want to try different
trimming positions (i.e. upwards, downwards or across) for better results.
•
Hair should be dry and free from any waxes or lotions.
•
If hair builds up during use, switch the unit off, remove any attachment in use and
clean any excess hair clippings from the attachment and groomer.
3-DAY STUBBLE, AND BODY HAIR MAINTENANCE
Attachments
Wide trimmer with 1.5 mm fixed comb
Body hair attachment
3-day stubble look:
Let your stubble grow to a length that is slightly longer than the look you are trying to
achieve.
1. Fit the 1.5 mm fixed comb to the wide trimmer attachment.
2. Run your trimmer through your beard against the direction of hair growth.
5
Advertisement
