a/d/s/ PQ40.2 Owner's Manual page 7

System 2 - PQ40.2 used in 3-channel mode with high-pass main speakers and low-pass subwoofer.
Note: Although shown as 2-channel, the source unit may be either 2 or 4-channel depending on
the setting of the 2/4 channel switch.
front left
satellite
System 3 - PQ40.2 used in 4-channel mode with 2 channels high-pass, 2 channels low-pass or bandpass.
Depending on the crossover frequency chosen, this configuration may be used for satellite/subwoofer
operation or to bi-amp a midrange/tweeter combination as shown.
Note: Although shown as 2-channel, the source unit may be either 2 or 4-channel depending on
the setting of the 2/4 channel switch.
front right
satellite
subwoofer
front left
tweeter
front right
tweeter
front left
midrange
front right
midrange
60A
60A
6