Specifications - a/d/s/ PQ40.2 Owner's Manual

specifications

amplifier section
power output 4 (watts)1
power output 2 (watts)2
fuse type
dimensions
distortion all channels driven
frequency response
signal-to-noise ratio full
bandwidth @ rated output power
damping factor @ output
connector full bandwidth
input sensitivity
input impedance
crossover section3
ch 1 & 2
ch 3 & 4
Constant Bass
1 All channels driven, continuous FTC rated 4 load, 20Hz to 20,000Hz, <0.1% THD, power input
voltage at 13.8DVC.
2 All channels driven, continuous FTC rated 2 load, 20Hz to 20,000Hz, <0.1% THD, power input
voltage at 13.8DVC.
3 All channels are selectable with infinitely variable adjustments from 45Hz to 5,000Hz with a slope
of 12dB/octave and a "Q" of .707.
21
PQ 40.2
4 channel 4 x 100
2 channel 2 x 300
4 x 150
60 A maxi
13" x 16 1/8" x 2"
<0.1% 20Hz to 20,000Hz
±1dB 10Hz to 30,000Hz
>90dB
>150
100mV to 8Vrms for full output
47 k
high-pass 12dB/octave variable 45Hz- 5kHz
high-pass & low-pass 12 dB/octave variable 45Hz- 5kHz
low-pass 12dB/octave variable 30Hz- 300Hz