Synology Nas At A Glance - Synology DS620slim Hardware Installation Manual

Synology NAS at a Glance

No. Article Name
1
Status Indicator
2 Alert Indicator
3
Power Button
4 LAN Indicator
5 Drive Status Indicator
6
Drive Tray Lock
7 Drive Tray
8 Power Port
9 LAN Port
Kensington
10
Security Slot
11
RESET Button
12 USB 3.0 Ports
13 Fan
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "LED Indicator
Table".
Displays warnings regarding fan or temperature. For more information, see
"LED Indicator Table".
1. Press to power on the Synology NAS.
2. To power off the Synology NAS, press and hold until you hear a beep sound
and the Power LED starts blinking.
Front Panel
Displays the status of the network connection. For more information, see
"LED Indicator Table".
Displays the status of the installed drive. For more information, see "LED
Indicator Table".
Lock or unlock drive trays.
Install drives (hard disk drives or solid state drives) here.
Connect the AC power cord here.
Connect network cables here.
Attach a Kensington security lock here.
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and passwords for the admin account.
Back Panel
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the Synology NAS to "Not Installed"
status so that DiskStation Manager (DSM) can be reinstalled.
Connect external drives or other USB devices to the Synology NAS here.
Disposes of excess heat and cools the system. If the fan malfunctions, the
Synology NAS will emit a beeping sound.
Description