Advertisement
Assembly
instructions
Unpacking
• Cut the straps, then along the dotted line on the bottom of the box; lift
the box over the unit and unpack.
• Locate the hardware package. The hardware is separated into four
steps. Remove the tools rst. Remove the hardware for each step as
needed to avoid confusion. The numbers in the instructions that are in
parenthesis (#) are the item number from the assembly drawing for
reference.
Tools included
• 13/15mm wrench
• 12/14mm wrench
• Phillips screwdriver
• Combination m6 allen wrench & phillips head screw driver
Parts included
• 1 main frame
• 1 rear stabilizer
• 1 console mast
• 1 seat back frame
• 1 front handle bar
• 1 handle bar
• 1 console mast cover
• 1 front stabilizer cover
• 1 rear stabilizer cover
• 1 console
• 2 drink bottle holder
• 2 pedals
• 1 hardware kit
9
Advertisement
