Advertisement
ensure the air supply valve is turned off before disconnecting the air supply hose.
9
To move a transportable compressor use the handle only. lift the compressor so that the front leg gives enough clearance for
9
manoeuvring but maintain unit's centre of gravity in front of the wheels. dO NOT attempt to lift or move the compressor by any other
means.
Use the compressor in a well ventilated area and ensure it is placed on a firm surface.
9
Keep tools and other items away from the compressor when it is in use, and keep area clean and clear of unnecessary items.
9
ensure the air hose is not tangled, twisted or pinched.
9
Keep children and unauthorised persons away from the working area.
9
only move the compressor by the handle if portable.
9
dO NOT dis-assemble compressor for any reason. The unit must be checked by qualified personnel only.
8
dO NOT use the compressor outdoors, or in damp, or wet locations.
8
dO NOT operate within the vicinity of flammable liquids, gases or solids.
8
dO NOT touch compressor cylinder, cylinder head or pipe from head to tank as these may be hot.
8
dO NOT use this product to perform a task for which it has not been designed.
8
dO NOT deface the certification plate attached to the compressor tank.
8
dO NOT cover the compressor or restrict air flow around the unit whilst operating.
8
▲
dANGER! dO NOT direct the output jet of air towards people or animals.
dO NOT operate the compressor without an air filter.
8
dO NOT allow anyone to operate the compressor unless they have received full instructions.
8
WARNiNG! The air tank is a pressure vessel and the following safety measures apply:
‰
dO NOT tamper with the safety valve, dO NOT modify or alter the tank in any way and dO NOT strap or weld anything to the tank.
8
dO NOT subject the tank to impact, vibration or to heat and dO NOT allow contact with abrasives or corrosives.
8
drain condensation from tank daily and inspect inside walls for corrosion every three months and have a detailed tank inspection carried
9
out annually. The tank shell must not fall below the certified thickness at any point.
WARNiNG! If an electrical fuse blows, ensure it is replaced with an identical fuse type and rating.
‰
When not in use, store the compressor carefully in a safe, dry, childproof location.
9
When the compressor is not in use it should be switched off, disconnected from the mains supply and the air drained from the tank.
9
dO NOT carry out any welding operations on any pressurised parts of the vessel.
8
1.3.
iNSPECTiON OF PRESSURE TANK BOTH iNTERNAL ANd EXTERNAL
1.3.1.
Under the Pressure systems Safety Regulations 2000 it is the responsibility of the owner of the compressor to initiate
a system of inspection that both defines the frequency of the inspection and appoints a person who has specific responsibility for
carrying out the inspection.
2. iNTROdUCTiON
A V-pump belt driven compressor, 150/200ltr, 3hp with bespoke front control panel, with two outlets, one regulated and one direct. The
pump features heavy-duty fully cast cylinders, capped by alloy heads for improved heat dissipation and long life. Suitable for professional
workshop applications. Powered by a heavy-duty induction motor for reliable operation. Twin capacitors and a centrifugal
switch aid trouble free startup on a good 16amp supply (see 1.1.6 for power options). Precision welded receiver tank manufactured to
meet Pressure Vessel directive 2009/105/eC. Fitted with fully automatic pressure cut out switch, air regulator, received and supply
pressure guages. Supplied with handle and wheels for easy manoeuvrability.
3. SPECiFiCATiON
model no.
motor output
Voltage/phase
minimum Rated Supply
Speed
noise level
Air displacement cfm(ltr/min)
maximum Free Air delivery cfm(ltr/min)
maximum Pressure
Receiver Capacity
outlet
Size (W x d x H)
Weight
4. ASSEMBLY
4.1.
Remove compressor from packaging and inspect for any shortages or damage. If anything is found to be missing or damaged contact
your supplier.
4.2.
Save the packing material for future transportation of the compressor. We recommend that you store the packing in a safe location, at
least for the period of the guarantee. Then, if necessary, it will be easier to send the compressor to the service centre.
4.3.
Confirm that the mains voltage corresponds with the voltage shown on the compressor data plate.
4.4.
Assemble the wheels and swivel castor using the nuts, bolts and washers supplied (fig.8).
4.5.
The compressor should be operated on a horizontal flat surface, or one that does not exceed 5° either transversely (tyres fully inflated to
1.5bar) or longitudinally with chocks (fig.3), and should be in a position that allows good air circulation around the unit (see 1000mm
nominal).
4.6.
Before using the compressor check the oil level by referring to the oil sight glass (fig.4C). on a horizontal surface, if the oil level is not up
to the red centre mark it should be further topped up with recommended oil (See section 5.7). To top up unscrew plug (fig.4B).
© Jack Sealey limited
SAC3153B
3.0hp
230V - 1ph
16A (see 1.1.6 for power options)
1243rpm
96dB(A)
13.4(380)
10.95(310)
145psi(10bar)
150ltr
Hi-Flow Quick Release Coupling
1210 x 600 x 970mm
89kg
Original Language Version
SAC3203B
3.0hp
230V - 1 ph
16A (see 1.1.6 for power options)
1243rpm
96dB(A)
13.4(380)
10.95(310)
145psi(10bar)
200ltr
Hi-Flow Quick Release Coupling
1410 x 600 x 1020mm
103kg
SAC3153B/SAC3203B
Issue 3 (4, 6) 27/09/18
Advertisement
