Troubleshooting; Product Cleaning; Product Disposal - Daga BS-30 Directions For Use Manual

TROUBLESHOOTING:

Possible operating anomalies
INCIDENT CAUSE
The device Device not
does not switched on
work. or misplaced
battery.
The device is
damaged.
Error messa-
Overload
ges "Err"

PRODUCT CLEANING

This product can only be cleaned by hand, using a soft damp cloth
and mild soap. The use of abrasive cleaning products or brushes,
solvents, benzine, thinner or alcohol is completely prohibited. Never
immerse the appliance or any of its parts in water or excessively
moisten it in order to clean it. Do not re-use the appliance until it is
completely dry.

PRODUCT DISPOSAL

Do not dispose of the product in the rubbish at the end of its
shelf-life. Contact the organic collection centre nearest your home
in accordance with the Waste Electrical and Electronic Equipment
(WEEE) Directive 2012/19/EU to contribute to the protection of the
environment.
Request detailed information regarding the current methods for
disposing of packaging and used devices from your distributor.
We hope that you will be satisfied with this product.
SOLUTION
Put on the device, and wait
until your weight is shown or
press on it with your feet until
"0.0" is shown on the display.
Check that the battery is insta-
lled with positive polarity "+"
facing outwards.
Contact the Daga technical
service.
It means that it has exceeded
the maximum weight
7