Advertisement
Note 1: Read range is stated in a clean RF and electrical
environment using Viking proximity cards or fobs
presented parallel to the reader surface with the reader
operating at 12 VDC. Read range may be affected by local
installation conditions. Range will be less when mounting
to metal.
Note 2:
For user orientation in non-illuminated
environments the 5&6-keys are always illuminated.
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet and
the telephone line. It is recommended that a surge protector be installed to protect against such surges.
Note: If powering the reader from its own
power supply, the negative lead of the power
supply must be connected to the BLACK
lead on both the reader and the controller.
Requirements
Installation
0.910
Wiring
1.780
5.894
To Viking Product
(Keep unused leads
Earth Ground
5.250
0.322
from shorting)
Advertisement
