Viking PRX-2 Product Manual

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
125KHz Proximity Card Reader with Built-In Keypad
The model PRX-2 is designed to be mounted directly to
standard single-gang wall box, and integrates both a
125KHz proximity card reader and keypad into a single-
unit making it ideal for applications requiring an access
credential and/or personal identification number (PIN).
The proximity card reader and keypad of the PRX-2 are
both capable of transmitting data in 26-Bit Wiegand
format, making it compatible with any of the Wiegand
equipped Viking entry controllers. The keypad is based
upon cutting-edge,
technology, which, unlike membrane keypads, includes no
moving parts prone to early failure. Advanced keypad
enhancements include fully potted circuit board (EWP),
keys with blue LED backlighting, raised key outlines and
pip on the 5-key.
The PRX-2 delivers non-contact read ranges up to 6
inches (152 mm), and operates from 5 to 14 VDC.
Mounting is simplified with horizontal and vertical
mounting slots, which allow the reader to be conveniently
adjusted and leveled. Concealing the mounting hardware,
the PRX-2 ships with both Black and Ash (Off-White)
covers standard.
Features
• Read range of up to 6 inches using proximity cards, 3
inches with PRX-FOB
• Reader Format: 26-bit Wiegand
• Keypad formats: 8-bit burst (default) and 26-bit Wiegand
• Technologies supported: Viking PRX-C, PRX-C-ISO,
PRX-FOB, LRT-4 certain legacy HID® proximity
protocols* and certain AWID 125Khz proximity
protocols**
• Designed for outdoor use, the PRX-2 comes standard
with Enhanced Weather Protection (EWP) (DOD# 859)
• PRX-2 is designed to meet IP66 Ingress Protection
Rating (see DOD# 859)
• Mounts to a standard single gang electrical box
• Pigtail connection for easy installation
• Red LED shows activity
• Beep tones acknowledge key strokes
• Programmable Facility Code stored in non-volatile
memory (no batteries required)
• Can be mounted directly to a metal surface
• CE marked
* HID and the HID logo are registered trademarks of HID Global
Corporation, an ASSA ABLOY company. All other trademarks
are the property of their respective owners.
** AWID is a trademark of Applied Wireless Identification Group.
www.VikingElectronics.com
Information: 715-386-8861
PRODUCT MANUAL
non-mechanical, capacitive
The PRX-2 comes equipped with Enhanced Weather
Protection (EWP) for outdoor installations where the unit
is exposed to precipitation or condensation. The PRX-2
features sealed connections, as well as an epoxy potted
circuit board. For more information on Enhanced Weather
Protection (EWP), see DOD# 859.
Compatible Products
Model Description
AES-2000 Accessible Entry System
AES-2005 Accessible Video Entry System
C-4000 Apartment/Office Entry Controller
ES-1 Stand Alone Keyless Entry System
ES-3 Entry System Door Controller
VoIP Entry phone, Keypad, 12 Number Auto
K-1200-IP
Dialer, Keyless Entry
VoIP Entry phone, Keypad, Auto Dialer, Keyless
K-1700-IP
Entry
K-1900-8-IP VoIP Entry Phone with Handset and Keypad
PRX-C Proximity Card
PRX-C-ISO Thin Proximity Card
PRX-FOB Proximity Key Fob
LRT-4 Long Range Transmitter with Proximity Module
Specifications
Power: 5-14V DC 50mA - average, 115mA - peak.
Dimensions: 4.6" x 3.1" x 0.7" (117mm x 77mm x 18mm)
Shipping Weight: 0.25 lbs (0.11 kg)
Environmental: -40°F to 150°F (-40°C to 65°C) with up to
100% humidity
Connections: 8" long pigtail leads, 22 gauge
Read Range: Up to 6 inches (152 mm)
Input Voltage: +5 to 14 VDC
Current Draw: 30 mA minimum, 50 mA typical, 115 mA peak
LED Indicator: Four-State Standard (Red, Green, Amber,
and Off)
Audio Tone: Standard
Frequency: 125 KHz excitation
Reader Formats: Wiegand (26-bit Industry Standard) and
ABA Track II magnetic stripe (clock/data)
Keypad Formats: 8-Bit Burst (default) and 26-Bit Wiegand
PRX-2
125KHz Proximity Card
Reader with Keypad
January 14, 2019
DOD#
202
204
164
193
195
271
253
361
198
198
198
226