Advertisement
ASSEMBLY, OPERATION
& MAINTENANCE
ASSEMBLY
ATTACHING WORK LIGHT HEAD TO BASE
Place the base (A) Fig.4 on a flat surface. Position
the U-Shape bracket (B) of the work light head onto
the base (A) as shown in Fig.4. Use the lock knob
(C), flat washer and spring washer to secure the
work light head on the base.
OPERATION
ADJUSTING THE LIGHT DIRECTION
FIGURE 4
Your work light can be tilted vertically up to 30°
down or 90° up. To adjust the light direction, loosen
the side locking knobs (D) Fig.4. Adjust the work
light head to desired position, and retighten knobs.
ON/OFF SWITCH
Your work light is equipped with a weather
protected sealed ON/OFF switch (A) Fig.5 located
on the back side of the work light. Press the switch
once to turn the work light on and press the switch
a second time to turn it off. Always turn the work
light off before unplugging from power source.
MAINTENANCE & SERVICE
FIGURE 5
Your work light requires very little care and
maintenance. Simply clean the lens regularly with a non-abrasive cleaner. Use similar
care for the base and U-bracket. When servicing, use only identical parts. Use of any
other parts may create a hazard or cause product damage. Contact a King Canada
service centre for identical replacement parts.
WARNING: Always make sure the work light is unplugged and completely cool before
attempting to clean it.
RECYCLING
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact you local government for information regarding the collection
systems available. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your
health and well-being.
Advertisement
