Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized service center, King Canada will either repair or replace the product if any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the warranty period.
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your cordless tool.
Page 4
GENERAL & SPECIFIC SAFETY INSTRUCTIONS 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off.
Page 5
LITHIUM BATTERY AND CHARGING INFORMATION Technical Specifications Model ......................KC-1502LED-C Voltage/Capacity ..................7.4V, 2,600 mAh Battery type ....................Lithium-ion Lumens ......................1,500 (6500K) Wattage ........................10W Charger ........................120V Charge time/Runtimes..................3 hours LED life ......................+30,000 hours WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
Page 6
GETTING TO KNOW YOUR CORDLESS LED WORK LIGHT Getting to know your Cordless LED Work Light 1- Carry handle with foam 2- Aluminum housing 3- 1 of 2 tilt lock knob 4- Pivot lock knob 5- Steel base 6- LEDs 7- Sealed On/Off switch 8- Light intensity controls 9- Input jack (charging)
Page 7
PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.