Table of Contents
Advertisement
NOTE:
Your device has the ability to maintain a constant web connection through
Wi-Fi or mobile networks (GPRS,EDGE,3G, or HSPA). However, Wi-Fi connection
has priority over mobile network connection if both are available.
To check the current Wi-Fi network connection
From the status bar:
When your device is connected to a wireless network, the Wi-Fi icon
appears in the status bar to indicate the signal strength (number of bands
that light up). If Wi-Fi settings → Network notification is enabled, this icon
appears in the status bar as the device discovers an accessible Wi-Fi
network within range.
From the Wi-Fi network:
1 Touch the Home button
Wireless controls → Wi-Fi settings.
2 Touch the Wi-Fi network that the device is currently connected to
(labeled Connected). A window opens displaying the Wi-Fi network's
name, status, speed, signal strength, security info, and IP address.
NOTE:
If you want to disconnect the Wi-Fi network from your device, touch Forget
on this window. You will need to configure the Wi-Fi settings again if you want to
restore connection to this wireless network.
To connect to another Wi-Fi network
1 Touch the Home button
Wireless controls → Wi-Fi settings. Detected Wi-Fi networks are
displayed in the Wi-Fi networks list.
NOTE:
To start a new search for available Wi-Fi networks, on the Wi-Fi settings
screen, touch the Menu button
2 Touch another Wi-Fi network to connect to it.
NOTE:
If the wireless network you want to connect to is not in the list of detected
networks, flick to the bottom of the list to touch Add Wi-Fi network. Enter the Wi-Fi
network settings, and then touch Save.
→ the Menu button
→ the Menu button
→
Scan.
→ Settings →
→ Settings →
Web
55
Advertisement
Table of Contents
