Setting Up An Infrastructure Network - D-Link DWL-900AP+ User Manual

Getting Started

Setting Up an Infrastructure Network

Please refer to the following sections
of this manual for additional
information about setting up a network:
Networking Basics- learn how to
check your IP Address; share printers
and files.
Using the Configuration Utility- learn
the settings you must use on each
computer in your network for
successful communication.
Troubleshooting- learn how to check
for the proper installation of the
network adapters' drivers and other
tips for troubleshooting the network.
Please remember that D-Link AirPlus wireless devices are pre-configured to
connect together, right out of the box, with the default settings.
You will need a broadband Internet access (Cable/DSL)
subscription.
Consult with your Cable/DSL provider for proper installation of the
modem.
Connect the modem to an Ethernet Broadband Router (such as the
D-Link DI-604)
DI-604.
Connect the router to the D-Link AirPlus DWL-900AP+.
the Quick Installation Guide for setting up the DWL-900AP+.
If you are connecting a desktop computer in your network, you can
install the D-Link AirPlus DWL-520+ wireless PCI adapter into an
available PCI slot.
DWL-520+.
Install the drivers for the wireless cardbus adapter (D-Link
AirPlus DWL-650+) into the laptop computer.
Installation Guide included with the DWL-650+ for installation
instructions.
See the Quick Installation Guide included with the
See the Quick Installation Guide included with the
Refer to
See the Quick