Features - D-Link DWL-7200AP Manual

Features

 Better security with WPA- The DWL-7200AP can securely connect to wireless
clients on the network using WPA (Wi-Fi Protected Access) providing a much
higher level of security for your data and communications than has previously
been available.
 Faster Wireless Networking with speeds up to 108Mbps in Super AG
mode

Compatible with 802.11a, 802.11b and 802.11g Devices - Fully compatible
with the IEEE 802.11a, 802.11b and 802.11g standards, the DWL-7200AP
can connect with existing 802.11b-, 802.11g- or 802.11a-compliant wireless
network adapter cards.

5 Different Operation modes -
operation modes to meet your wireless networking requirements: Access Point,
AP-to-AP Bridging, AP-to-Multipoint Bridging, AP Client, or Repeater.
 Easy Installation with PoE (Power over Ethernet).
 Compatible with the 802.11b standard
to 11Mbps - that means you can migrate your system to the 802.11g standard
on your own schedule without sacrificing connectivity.
LEDs
LED stands for Light-Emitting Diode. The DWL-7200AP Wireless Access Point
with PoE has 5
LED
Power
LAN (10/100)
WLAN
(802.11a and
802.11b or
802.11g)
Green
LEDs as shown below:
A steady light indicates a connection to a power
source
A steady light indicates a connection to the Ethernet
port; a blinking light indicates activity
A blinking light indicates activity in the respective
wireless mode: 802.11a and/or 802.11b/802.11g
Capable of operating in one of four different
to provide a wireless data rate of up
LED Activity
7