Table of Contents
Advertisement
Dehumidification Mode
Cooling only
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidi-
fier and cooling mode to remove humidity ef-
fectively.
1
Press
|
button to turn on the indoor.
c
2
Press
button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at dis-
play section for about 5 seconds.
Power Cooling/Heating Mode
Strong cooling/heating will be conducted in
short time.
1
Press
|
button to turn on the indoor.
2
Press
button to operate power cool-
ing/heating mode.
- When power (cooling/heating) button is
pressed during cooling/dehumidification
mode, power cooling will be operated.
In power cooling mode, desired tempera-
ture is set to 18°C and the horizontal lou-
ver is fixed at the highest position.
- When power (cooling/heating) button is
pressed during heating operation, power
heating will be operated.
In power heating mode, desired tempera-
ture is set to 30°C and the horizontal lou-
ver is fixed at the lowest position.
Fan Mode
Cooling only
1
|
Press
button to turn on the indoor unit.
2
Press
button to circulate indoor air.
- When canceling operation, press
button once more.
- During fan mode, outdoor fan and com-
pressor will not be operated.
OPERATING INSTRUCTIONS
Heat Pump
1
Press
|
button to turn on the indoor unit.
2
Press
button on remote controller to
circulate indoor air.
- When canceling operation, press
button once more.
- During fan mode, indoor unit turns on the
fan speed lamp and room temperature
lamp of its display panel.
Simple Reservation
Turning ON reservation mode
This function is able to turn on unit after a set-
ting time.
1
When the unit is turned off, adjust desired
setting time with
- Up to the maximum of 24 hours can be
selected.
Turning OFF reservation mode
This function is able to turn off unit after a set-
ting time.
1
When the unit is turned on, adjust desired
setting time with
- Up to the maximum of 7 hours can be se-
lected.
!
NOTE
After performing the setting, if corresponded
setting button is pressed once, remaining set-
ting time will be displayed, and if it is pressed
once again, corresponded setting function will
be cancelled. (same function as
setting time will be displayed with the unit of 1
hour.
15
button.
button.
) Remaining
Advertisement
Table of Contents
