D-Link AirPlus DWL-650+ Manual page 10

Getting Started
Setting Up an Infrastructure Network
Please remember that D-Link AirPlus wireless devices are pre-configured to
connect together, right out of the box, with the default settings.
You will need a broadband Internet access (Cable/DSL)
subscription.
Consult with your Cable/DSL provider for proper installation of the
modem.
Connect the modem to a wireless Broadband router (the D-Link
DI-614+.)
Install the drivers for the DWL-520+ wireless network adapter into
the desktop computer.
with the adapter.
Install the drivers for the D-Link AirPlus DWL-650+ wireless
network adapter into the laptop computer.
Installation Guide included with the DWL-650+.
If you are using the 802.1x protocol in your network, your setup may be different
than that pictured above. Please refer to the manual that came with your D-Link
802.1x compatible router or access point for further tips on setting up a more secure
network.
See the Quick Installation Guide included with the router.
See the Quick Installation Guide included
See the Quick
10