Using The Configuration Utility - D-Link DWL-650 Quick Installation Manual

APPENDIX

Using the Configuration Utility

The D-Link Air Configuration Utility
default, it will take you to the
A. Status: Displays the
MAC Address of the
Access Point that
is associated with the
DWL-650.
D. Channel: Displays
the channel information.
By default, the channel is
set to 6 and selection is
automatically determined
by the DWL-650.
If the utility icon does not appear, double-
click the shortcut icon
on your desktop.
:
B. SSID The Service Set
Identifier is the name
assigned to the wireless
network. The factory SSID
setting is set to default.
A
B
C
D
E
F
E. Link Quality / Signal Strength:
Displays the Link Quality for the DWL-
650 wireless connection to the access
point. The Signal Strength represents the
wireless signal between the access point
and the DWL-650. The percentage
coincides with the graphical bar.
that has appeared
window will appear. By
Link Info section.
C.
setting is 11 Mbps; however,
TxRate settings are auto-
matically determined by the
DWL-650 depending on the
distance from the access point.
TxRate:
The default
F. Data Rate:
Graphically
displays the
statistics of data
transmitted and
received.