D-Link DWL-520 Manual page 16

Using the Configuration Utility (continued)
Site Survey > Add
In this window you can select the
type of network connection.
Click OK to save the changes.
If you clicked on Add, you
can configure, in this window,
all the properties of a profile
that you wish to add to the
network.
If you clicked on Configuration
or Properties you can configure,
in this window, all the properties
of a profile that already exists in
the network.
If you select WPA in the
Authentication field, please
see detailed instructions for
configuring WPA on the
following pages.
If you choose to use the IEEE
802.1X feature, please see the
detailed instructions on the
following pages.
Click OK to save the
changes.
Advanced
Configuration, Add or Properties
16