D-Link AirPro DWL-5000AP Quick Installation Manual page 4

The DWL-5000AP will work out of the box with D-Link AirPro DWL-A520 and DWL-
A650 using the default factory settings.
•
The default factory settings can be modified in the Configuration menu.
•
The default settings for the DWL-5000AP are the following:
SSID: default
The SSID on the wireless network
adapters must be the same in order
to communicate with the DWL-
5000AP
Turbo: Off
If the Turbo mode is enabled on the
DWL-5000AP, then Turbo mode
must also be enabled on the wireless
adapters.
Enable Encryption: Disabled
To enable Encryption, check this box
and enter in the Encryption key.
Note: If Encryption is enabled on the
DWL-5000AP, then the Encryption
on wireless adapters must also be
enabled.
Enter the Encryption Key using the
following guideline.
The following are the options:
64-bit - 10 hex digits (A-F; 0-9)
128-bit - 26 hex digits (A-F; 0-9)
152-bit - 32 hex digits (A-F; 0-9)
default
4