Advertisement
Specifications
Model: PLM10ZM
Capacity: 5000mAh 3.7V (18.5Wh)
Operating temperature: 0°C~40°C
Input port: Micro-USB
Input: 5.0V
2.0A
Charging time: 2.7 hours (5V/2A charger, with USB cable included)
Important Safeguards
Make sure your Mi Power Bank is fully charged on its first use.
When charging a device with Mi Power Bank, make sure your device displays the ba ery
charging icon and the Mi Power Bank is working properly.
When recharging Mi Power Bank or charging a device with Mi Power Bank, make sure you use a
standard charging cable.
If all indicators go off when charging a device with Mi Power Bank, recharge your Mi Power
Bank shortly.
When charging a device with Mi Power Bank, the device will use Mi Power Bank's power first.
Disconnect Mi Power Bank to avoid further discharge once your device is fully charged.
When Mi Power Bank enters protection mode (LEDs remain off a er pressing the Power Check
bu on) due to short circuit or other reasons, charge it with an external charger to resume.
WARNING
Mi Power Bank contains Li-ion ba ery cell. Do not open the casing to avoid cell damage or other
hazards.
Do not dismantle, crush, puncture and short circuit Mi Power Bank, or expose it to liquids, fire or
environments where the temperature is above 60°C (140°F).
Ba ery type: Li-polymer ba ery
Rated capacity: 3300mAh 5.1V (TYP 1A)
Dimensions: 127 × 68.9 × 10.7 mm
Output port: USB-A
Output: 5.1V
2.1A
Advertisement
