Advertisement
MSD-SRF4X Industrial 4-Port RS-232 to Ethernet Data Gateway TCP/IP User Manual
The MSD-SRF4X 4 port RS-232 to Ethernet data gateway will address the
need to add 2 RS-232C devices to an IP-based Ethernet LAN on your
system, has built-in watch dog function for hardware hangs.
The MSD-SRF4X 4-Port RS-232 to Ethernet Data Gateway addresses the
need to connect individual RS-232C devices, such as PLCs, meters,
sensors, to an IP-based Ethernet LAN. It enables your application
software to access serial devices anywhere on a local area network or the
Internet. This RS-232 to Ethernet adapter is a ruggedly constructed metal
chassis with its RJ45 connection, 12VDC power jack, and LED indicators
conveniently located on the back panel, out of the way of any serial cable connection.
The 4-Port RS-232 to Ethernet Data Gateway is easy to install and remotely connect through a variety IP addressing
methods (UDP, IP, TCP, ICMP, HTTP, DHCP, ARP-Ping). Its rugged industrial-grade construction provides the ideal
solution for applications requiring serial port environments and network device management.
Features
•
Provides 4 RS-232 Ports over Ethernet
•
Provides 4 DB9 RS-232 Male Connectors
•
RS-232 Speed from 300bps to 115.2Kbps
•
Provides one 10/100Mbps, RJ45 LAN Port
•
LAN Supports Auto Cross Over Feature
•
Supports Setup and Connect Passwords
•
Supports Standard Windows Socket Protocol
•
Provides TCP Server, TCP Client, and UDP
•
Equipped with Wall Mounting Holes
•
Provides a Built-in watch dog function designed to reset the unit when the hardware/software encounters an
error
Connector Layout
Port 4
Port 3
Port 2
Sales@coolgear.com
Heartbeat LED
Port 1
www.CoolGear.com
Advertisement
Table of Contents
Related Manuals for CoolGear MSD-SRF4X
Summary of Contents for CoolGear MSD-SRF4X
- Page 1 MSD-SRF4X Industrial 4-Port RS-232 to Ethernet Data Gateway TCP/IP User Manual The MSD-SRF4X 4 port RS-232 to Ethernet data gateway will address the need to add 2 RS-232C devices to an IP-based Ethernet LAN on your system, has built-in watch dog function for hardware hangs.
- Page 2 1. Use static electricity discharge precautions. Remove possible static discharge potential from any objects that the data gateway may come in contact with before installation. This can be accomplished by touching a bare metal chassis rail after you have turned off the power. 2. Attached the power adapter. Sales@coolgear.com www.CoolGear.com...
- Page 3 The Em.exe is a Microsoft Windows based utility to find all the data gateways connected on the same subnet and network segment. To run the Em.exe utility, please insert the driver CD supplied with the data gateway. Open (double click) the program at the following location (assume the CD-ROM drive is at E) E:\Utility\82500\Em.exe Sales@coolgear.com www.CoolGear.com...
- Page 4 When you entered Setup Menu of the data gateway, the following page will be available for your access. Please click Update button after you changing your settings. Please also remember you password because you need it when you are going to enter this setup menu next time. Sales@coolgear.com www.CoolGear.com...
- Page 5 Male DB9 Pin Assignments and Cable Wiring Environmental Information • Power Requirements: 5V DC, 250mA (max) • Operating Temp.: 0 to 55°C (32 to 131°F) • Operating Humidity: 5 to 95% RH • Dimensions (LxWxH): 5.90”(L)x2.61”(W)x1.02”(H) (15.00 x 6.65 x 2.60 cm) Sales@coolgear.com www.CoolGear.com...
Need help?
Do you have a question about the MSD-SRF4X and is the answer not in the manual?
Questions and answers