Dimplex WFE3BE Instruction Manual page 19

Heat Output Selection
The remote control offers the facility to select the heat output from the appliance
between HI and LO heat settings, HI heat is set by default. This is a global heat setting
and once set all other operational modes will operate with this setting.
In order to set/change the heat setting,
• From the home screen press and hold the ADV button for 2 seconds. The remote
will enter the heat selection screen.
• Use the arrow keys to navigate to the desired setting and confirm using the
ENTER key.
• The remote will return to the home screen and all heating modes will function
with the selected heat output.
NOTE:
The HI temperature setting will modulate the heat output to optimise the efficiency
of the product. As the room temperature approaches the set-point the heater will
automatically switch to the lo heat setting.
19