D-Link DSB-650TX Quick Installation Manual page 2

Installing the DSB-650TX
§ Plug the "A" connector of the
USB cable provided into an
available USB slot on your
computer. This is the narrow
end of the cable.
§ Plug the "B" connector of the
USB cable into the
DSB-650TX. This is the larger
end of the cable.
§ Connect one end of a
straight-through Ethernet cable
to the RJ-45 port of the
DSB-650TX.
§ Connect the other end of the
Ethernet cable to a switch or
broadband modem.
§ Windows will detect the
DSB-650TX and ask you for the
drivers. Refer to the following
section below that corresponds
to your operating system.
Type B
RJ45
- 2 -
Type A
RJ45