Led Indication; Compliance; Table 1. Led Descriptions - ADTRAN 6-Amp Power Installation And Maintenance Practice

Total Access Rackmount 6-Amp Power Supply Battery Charger Installation and Maintenance Practice

LED Indication

A set of three PS/BC multi color LEDs provide status for AC, DC, and battery charge condi-
tions. See Table 1 for LED descriptions. Descriptions are also labeled on the PS/BC.
LED
AC FAIL/UNIT FAIL/OVERLOAD
BATTERY VOLTAGE
CHARGING STATUS
All LEDs
Note: Descriptions are the same for a single battery.

Compliance

This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by ADTRAN could void the user's authority
to operate this equipment.
4

Table 1. LED Descriptions

Color Description
Green Normal 120 VAC operation
Red AC fail or rectifier overload or fail
Green Battery 1 and Battery 2 greater than 42 VDC
Yellow Battery 1 or Battery 2 less than 42 VDC
Red Battery 1 and Battery 2 less than 40 VDC
Green Battery 1 and Battery 2 charged or recharging
Yellow Battery 1 or Battery 2 discharging
Red Battery 1 and Battery 2 fully discharged
Off AC lost, Battery less than 35 VDC
61180043L2-5D