DBPOWER SBB-55210 User Manual page 13

Sound distortion
/rattle
Remote Control
not functioning
Bluetooth
reception failure
GENERAL SPECIFICATIONS
Power output ...................................................................................................DC12V
Audio output .....................................................................................................2x10W
Volume level too high
Out of range
The batteries in the remote
control are drained
The external device is
too far from the unit
Reduce the volume level by
pressing the Vol - Button on the
top of the unit ,Or press VOL- button
on remote control ,Reduce the
volume level of the paired/
connected device.
Point the remote contro closer to the
infrared receiver on the unit within
16 feet, +/-30 degrees,make sure
there are no obstacles in between
Replace with new battery
Put the external BT device close
to the unit.
Pair the unit with the BT Device as
the procedures stated in this manual.
12
1.5A