Info Tunnels - D-Link NetDefend DFL-CP310 Cli Reference Manual

Informational Commands

info tunnels

P
URPOSE
The
info tunnels
VPN tunnels. VPN tunnels are created and closed as follows:
• Remote Access VPN sites configured for Automatic Login, and Site-to-
Site VPN Gateways
A tunnel is created whenever your computer attempts any kind of
communication with a computer at the VPN site. The tunnel is closed when not
in use for a period of time.
• Remote Access VPN sites configured for Manual Login
A tunnel is created whenever your computer attempts any kind of
communication with a computer at the VPN site, after you have manually
logged on to the site. All open tunnels connecting to the site are closed when
you manually log off.
S
YNTAX
info tunnels
P
ARAMETERS
None.
R V
ETURN ALUES
The following information is displayed for each VPN tunnel:
site
src
dst
104
command is used to display a list of currently established
The name of the VPN gateway to which the tunnel is
connected.
The source IP address of the tunnel.
The destination IP address of the tunnel.
D-Link NetDefend CLI Reference Guide