Page 1
W I R ELESS S1 WIRELESS SPEAKER QUICK START GUIDE...
Page 2
YOUR S1 SPEAKER Built-in Microphone Bluetooth Indicator LED Bass Reflex Port...
Page 3
On/Off Switch Micro USB Power Port Charge Indicator LED Call Answer Button...
Page 4
CHARGING YOUR S1 Using the included Micro USB Charging Cable, connect the speaker to a suitable USB power source, such as a computer or mobile phone charger. The Charge Indicator LED will turn on when charging. When the Charge Indicator LED has...
CONNECTING AND PAIRING First, use the on/off switch to turn the speaker on. Check to see if the Bluetooth Indicator LED is flashing. If it is, the speaker is in Pairing Mode and is ready to be paired with. If the Bluetooth Indicator LED is not flashing, another device is already connected to the speaker.
Page 6
When the speaker is in Pairing Mode, search for Bluetooth devices on your phone and connect to the speaker. It will appear as ‘Mixx S1’. You will now be able to play music from your phone on the speaker. NOTE: If prompted for a passcode when...
ANSWERING PHONE CALLS If you receive a phone call while connected to the speaker, press the Call Answer button on the bottom of the speaker to accept the call. To end the call, press the Call Answer button again. If you were playing music before the call, the music will resume.
Page 8
SAFE USAGE INSTRUCTIONS This speaker contains a Lithium battery. It must be used and charged correctly. Improper use of this speaker may cause the battery to catch fire or explode resulting in serious or fatal injury. The battery shall not be exposed to excessive heat such as harsh sunlight or fire.
Page 9
temperature conditions. Do not expose the speaker to water, salt water, or allow the speaker to get wet in any way. If you dispose of the speaker, remember that it contains a Lithium battery and recycle accordingly.
Page 10
For support please visit www.mixxaudio.com Made in China...
Need help?
Do you have a question about the S1 and is the answer not in the manual?
Questions and answers