Pairing Your Headset - Jarv WaveFlex JRV-BTNH300 User Manual

PAIRING YOUR HEADSET

In order to use your Jarv Wave Flex Wireless Neckband
Bluetooth Headset with a Bluetooth-enabled device, you
will first need to pair the two.
1. Place the headset and the mobile phone where they
are easily viewable and no more than 3 ft apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is powered off
4. Press the Multi-Function
button for approximately 5-6
seconds until the red and blue
light flash alternately which
indicates that you are in Pairing
Mode.
(Note: A blue light will turn on at first
but keep pressing down the pairing
button until it changes to a flashing
blue/red light which indicates that
you are in pairing mode).
7