Pairing Your Headset - Jarv JRV-BTNH250 User Manual

PAIRING YOUR HEADSET

In order to use your Jarv Wave Sport Wireless Neckband
Bluetooth Headset with a Bluetooth-enabled device, you
will first need to pair the two.
1. Place the headset and the mobile phone where they
are easily viewable and no more than 3 ft apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is powered off
4. Press the Multi-Function button for approximately
5-6 seconds until the red and blue light flash
alternately which indicates that you are in Pairing Mode.
(Note: A blue light will turn on at first but keep pressing down the
pairing button until it changes to a flashing blue/red light which
indicates that you are in pairing mode).
Press the Multi-Function button
for approximately 5-6 seconds
until the red and blue light flash
alternately.
7