D-Link DFL-200 Quick Installation Manual page 7

Using The Setup Wizard (continued)
Step 3 - PPTP
Specify both PPTP tunnel parameters
and Physical interface parameters.
PPTP tunnel parameters:
Enter the Username, Password
and the PPTP Server IP address
provided by your ISP.
Physical interface parameters.
DHCP: If your Internet Service
Provider is using DHCP you should
select the DHCP radio button.
Static IP: If your Internet Service
Provider is using Static IP you should
select the Static IP radio button and
enter IP Address, choose a Subnet Mask
and enter the Gateway IP address.
Click Next
Step 3 - Big Pond
Fill out the user name and password
provided to you by your ISP.
Click Next and continue to step 4
Click Next
7