Table of Contents
Advertisement
Available languages
Available languages
result was as astounding as it was (in retrospect) logical. Due to the differently damped spring-mass principles
that result from the combination of gel mixtures and weights, overlaps and shifts occur as can be seen in the
table with the recommended pad types and weight classes, as well as also in the graph.
FINE TUNING
In order to set up components optimally and decouple them, different gel pads are included in this set. In the
table you can find the assignment to the respective weight classes. The values are recommendations based on
measurements made by in-akustik. The graph shows the homogeneous attenuation curve of the different gel
pads and the corresponding weight classes. Of course, other combinations can be tested in order to find the
best solution for the user or the best solution for the individual hi-fi system.
•
Designation:
Referenz High Tech Gel-Absorber
•
Item-No.:
00719220
•
EAN:
4001985513116
SAFETY INSTRUCTIONS
•
When installing the absorbers take care that the gel pads are not damaged by sharp and pointed objects
such as spikes. Damaged pads are not attractive but can nevertheless still be used.
•
The surfaces and the devices or the bottom of the loudspeakers must be smooth and free of dirt.
•
With standing loudspeakers, for example, after installation check whether they cannot tip over easily due
to the absorbers.
•
With heavy devices or loudspeakers, have another person help you
INSTALLATION
1. Select the suitable HIGH TECH gel pads in accordance with the specifications in the table. The pads can
be used variably depending on your personal wishes and experiences.
2. Place the gel pads with their flat side into the holding brackets. The edge of the gel pads must lie com-
pletely under the collar of the holding brackets
3. If the holding brackets are to be permanently connected to the device or loudspeaker, use the enclosed
OPER ATION MANUAL
REFERENZ HIGH TECH GEL-ABSORBER
7
Advertisement
Table of Contents
