Page 1
Quick Start Guide SB-3000 Congratulations on choosing the SVS SB-3000, one of the most powerful and advanced subwoofers in the world. We know you’re anxious to get it cranking so the following steps will guide you through the quick and easy installation process.
Page 2
Hook It Up For most set-ups, a single RCA subwoofer interconnect cable running from the AV Receiver’s “SUB 1” output to the SB-3000’s “LFE” line level input is all that’s required to connect the subwoofer into your system. If you run separate Preamplifier and Power Amplifiers, follow the “Line Level Connection –...
Page 3
S T A - 8 0 0 D | 2 For connection to an AV Receiver, set the SB-3000 volume to -10 in the app (on the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE and the phase to 0 degrees, then run auto-set-up on the AV Receiver.
Need help?
Do you have a question about the SB-3000 and is the answer not in the manual?
Questions and answers