Yamaha RX-V485 Quick Start Manual page 12

5
Preparing a network connection
Prepare a wired or wireless network connection in accordance with your network environment.
Note
The wireless antenna must be raised if the unit will be connected to a Bluetooth device.
Wireless network connection
ES S
W IR EL
Raise the wireless antenna so that it is standing up straight.
(Procedures for connecting the unit to a wireless router are described
8
in step .)
Notice
Do not apply excessive force on the antenna. Doing so may damage it.
12
En
Wired network connection
LE SS
W IRE
NETWORK
(NET)
Network cable
LAN
Router
Internet
Modem