Table of Contents
Advertisement
CARE AND MAINTENANCE
CLEANING
Metal:
• Buff using a soft cloth, slightly dampened with a citrus oil-based product.
• DO NOT use brass polish or household cleaners as these will damage the metal.
Glass:
• Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
• NEVER use abrasive cleansers or any cleaner that could scratch the surface.
Plastic:
• Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
Vents:
• Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
MAINTENANCE
Risk of electric shock! DO NOT OPEN the main panels! No user-serviceable parts
inside!
Storage:
• Store heater in a clean dry place when not in use.
Electrical and Moving Parts:
• The fan and motors are lubricated at the factory and will not require lubrication for the life of
the stove.
• Except for the light bulbs, all electrical parts and components are integrated into the heater and
are not serviceable by the consumer.
Light Bulb Inspection and Replacement:
The flame effect is created by two 40-Watt light bulbs with an E-12 (small) socket base. Use only this
same type of bulb as a replacement. If the flame effect does not work, the bulbs may have come
loose or been damaged during shipping.
Light bulbs become very hot during use. Allow at least 10 minutes for the bulbs to
cool before touching.
To inspect or replace the bulbs, first unplug the power cord from the outlet. Locate the access panel
on the back of the stove. Remove the screws and the panel. Check the bulbs to be sure they are
finger tight and in working order. Replace any damaged or faulty bulbs. Reattach the access panel.
Do not operate this heater without the access panel in place. Do not remove the back cover. There
are no serviceable parts inside.
7
Advertisement
Table of Contents
