Table of Contents
Advertisement
OPERATION
When the heat function is used for the first time, a slight odor may be present. This
NOTICE
is normal and should not occur again unless the heater is not used for an extended
period of time.
BUTTON
1. Press to turn on flame effect and
enable heater.
Heater switches will not work unless
this switch is turned on.
ON/OFF
2. Press again to shut off the power to
all functions.
1. With power turned on, press to turn
on low heat.
Low heat must be on to use high heat.
LOW
HEAT
2. Press again to turn off low heat.
1. With power and low heat turned on,
press to turn on high heat.
HIGH
2. Press again to turn off high heat.
HEAT
TEMPERATURE LIMITING CONTROL
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature (212°F / 100°C), the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3. Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
5. With the POWER switch OFF, plug the power cord back into the outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
cleaning, changing the light bulbs, or moving this stove. Failure to do so could result in
electric shock, fire, or personal injury.
NEVER immerse in water or spray with water. Doing so could result in electric shock,
fire, or personal injury.
ACTION / FUNCTION
INDICATION / RESULT
1. Flame effect turns on. Power light on switch
illuminates.
The heater is now enabled.
2. Flame effect, heater, and power lights all turn
off.
1. Heater and fan turn on low.
2. Low heat and fan turn off. Flame stays on.
1. Heater and fan turn on high.
2. High heat and fan turn off. Low heat and
flame stay on.
6
Advertisement
Table of Contents
