Advertisement
Installing the DSM-100BT Speaker
Adapter
Connect the included antenna to
the antenna connector located on
the rear panel of the DSM-100BT.
Connect one end of the power
adapter to the power connector
located on the rear panel of the
DSM-100BT and the other end
to an available power strip or wall
outlet.
The Power LED indicator
will light green to indicate that
the DSM-100BT is powered
on.
Connect your speaker's audio
cable to the Audio Out connector
located on the rear panel of the
DSM-100BT. For connection to a
speaker system with RCA outputs,
you can use the included RCA to
3.5mm audio converter connector
for installing the DSM-100BT.
2
Advertisement
