Hisense 58H6500E Quick Start Manual page 16

If your Cable or Satellite provider does not have a code available, please
contact us at one of the phone numbers on Page 1.
Using Your Cable Set-top Box or Satellite Receiver
Remote as a 'Universal' Remote
If you prefer to use your Cable Set-top Box or Satellite Receiver
Remote as a 'Universal Remote', then visit the Support page to
view a list of the codes.
Pairing the Remote Control
1. Pair the remote to the TV after you power it on. Keep the
remote control within 10 feet from the TV. Press and hold the
[ ] button at least 3 seconds to start pairing.
2. If the remote paired successfully then a confirmation will
display on the screen. If it did not pair successfully then an
'unsuccessful' message will display. Repeat step 1.
NOTE:
• If an unknown error occurred with the remote then it could
have been caused by interference. Try to remove what's
causing the interference and pair it again.
• If an unknown error occurred in the remote control while the
battery power is normal, you can take out the batteries and
press any key for 1~2 seconds, then the remote control can
work normally.
• The remote cannot be paired to the TV while the TV is in
standby mode.
12