Bebob ML-120V/V-HL User Manual

Features
•
Automatic switching by empty batteries to allow continuous powering of the Camera for
120s
•
For Power hungry cameras: maximum Load 20.0A
•
High-End aluminium V-Mount plate
•
2 Step empty battery-alarm
•
20Wh built-in power-buffer
•
12V (unreg.) D-Tap Port with self-resetting 5A Fuse
•
Zero maintenance required
•
works only with V-Mount Lithium-Ion Battery ( nominal voltage between 14.4V and
14.8V)
Charging
•
The ML-120V/V-HL charges itself from the V-Mount battery
•
At first charge or If completely empty, the ML-120V/V-HL will be ready to use after 60
minutes
•
While Charging the yellow "Charging" LED turns on
•
When fully charged the green „Ready" LED turns on
•
The ML-120V/V-HL charges itself automatically when needed.
•
During charging The ML-120V/V-HL keep monitoring the voltage of the battery and is
ready to switch if needed
bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: +49 89 27818282
ML-120V/V-HL Hot Swap Adapter
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB ML-120V/V-HL HOT SWAP
ADAPTER! PLEASE KEEP THIS MANUAL
FOR FUTURE REFERENCE
www.bebob.de
April 2016