Table of Contents
Advertisement
[Auto Mix]
Menu Item
Description
[Auto Mix]
Select whether to perform mixing the sound output from
[On] [Off]
AppRadio Mode + and AV source sound automatically.
[Input/Output settings]
Menu Item
Description
[USB MTP]
Select whether or not to activate USB MTP (Media Transfer
[On] [Off]
Protocol) connection.
[AppRadio Mode Sound]
Set where the sound for AppRadio Mode + is output when
it is used with a smartphone.
[AVH]
The sound is output from the speakers of this unit.
[Smartphone]
The sound is output from the speakers of the smartphone.
NOTE
With an iPhone, the sound is always output from the speakers of
this unit.
[AV Input]
Select AV input source (page 31).
[On] [Off]
[AUX Input]
Set to [On] for AUX source (page 30).
[On] [Off]
[Camera settings]
A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view
camera function. (For details, consult your dealer.)
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the gearstick is in the REVERSE (R)
position.
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera View] on the AV source selection screen
(page 16).
NOTE
To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On]
(page 33).
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the gearstick is
moved to REVERSE (R) from another position.
• When the screen changes to full-screen rear view camera image during normal driving, switch to the
opposite setting in [Camera Polarity].
• If you touch
while the camera image is displayed, the displayed image turns off temporarily.
Menu Item
Description
[Back Camera Input]
Setting rear view camera activation.
[On] [Off]
[Camera Polarity]
Setting the polarity of the rear view camera.
[Battery]
The polarity of the connected lead is positive.
[Ground]
The polarity of the connected lead is negative.
NOTE
This function is available when [Back Camera Input] is set to [On].
[Parking Assist Guide]
You can set whether to display the parking assist
[On] [Off]
guidelines on the rear view camera images when backing
up your vehicle.
33
En
Advertisement
Table of Contents
