JVC KD-DVH426 Instructions Manual page 27

Changing the source
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select "DISC" for the playback
source, disc play starts from where it has been
stopped previously.
For MP3/WMA disc, playback starts from the
beginning of the last playing track.
iPod or D. player
• When you turn on this unit, the iPod or
D. player is charged through this unit.
• While the iPod or D. player is connected, all
operations from the iPod or D. player are
disabled. Perform all operations from this
unit.
• The text information may not be displayed
correctly.
• If the text information includes more than
8 characters, it scrolls on the display (see
also page 20). This unit can display up to 40
characters.
Notice:
When operating an iPod or a D. player,
some operations may not be performed
correctly or as intended. In this case, visit the
following JVC web site:
For iPod users: <http://www.jvc.co.jp/
english/car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>
Title assignment
• If you try to assign titles to more than 30
station frequencies, "NAMEFULL" appears.
Delete unwanted titles before assignment.
General settings—PSM
• If you change the "AMP GAIN" setting from
"HIGH PWR" to "LOW PWR" while the
volume level is set higher than "VOL 30," the
unit automatically changes the volume level to
"VOL 30."
DVD setup menu
• When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
• When you select "16:9" for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
• Even if "4:3 PAN SCAN" is selected, the
screen size may become "4:3 LETTER BOX"
for some DVDs.
27