Connecting To Power - HP f880x User Manual

2.3 Connecting to Power

Use only the supplied car charger to power up the camcorder and
charge the built-in battery.
1. Connect one end of the car charger to the USB connector of the
camcorder. USB port input: DC 5V / 1A.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car charger input: DC 12 / 24V.
Note:
Please take note if the environment temperature reaches 45°C or above, the car charger still can
supply power to camcorder, but it may not charge the battery. This is characteristic of Lithium
polymer battery and is not a malfunction.
15